Front sprocket size and drivetrain loss

Discussion in 'Performance & Technical' started by rock3r4life, Sep 28, 2016.

  1. rock3r4life

    rock3r4life Rides with no training wheels

    Joined:
    May 23, 2015
    Messages:
    82
    Likes Received:
    7
    Im curious, is it ideal to have a larger or smaller front sprocket, ratios the same?

    I ask because my bmw came with a 17t, and I use a 16t.

    My r1 has a 16t and I need to raise the ratio a lil, now the question is do I bump the rear up 2, or the front down 1?

    How small is too small of a front for high-pony high-rpm applications?
     
    #1 rock3r4life, Sep 28, 2016
    Last edited: Sep 28, 2016
  2. Roll Hard Racing

    Roll Hard Racing What's an apex?
    STT Staff

    Joined:
    May 29, 2012
    Messages:
    153
    Likes Received:
    47
    Most people only go down 1 tooth in the front. If you go more, the chain tends to rub the living found out of the swingarm chain guide.
     
    rock3r4life likes this.
  3. sammPD4075

    sammPD4075 Knows an apex

    Joined:
    Apr 11, 2013
    Messages:
    1,458
    Likes Received:
    109
    i run -1/+1 on my r1
     
  4. rock3r4life

    rock3r4life Rides with no training wheels

    Joined:
    May 23, 2015
    Messages:
    82
    Likes Received:
    7
    New gen? the 14 and back had 17t
     
  5. sammPD4075

    sammPD4075 Knows an apex

    Joined:
    Apr 11, 2013
    Messages:
    1,458
    Likes Received:
    109
    2007 .. im broke so i dont get new stuff haha but ive always stuck to -1/+1 on any trackbike ive owned .. i dont change them for certain tracks .. i just run the same gearing and suspension for every track
     
  6. JTRC51

    JTRC51 The fast Juan

    Joined:
    May 9, 2008
    Messages:
    1,050
    Likes Received:
    111
    Going down 1 is less rotational mass vs going up 2. Lol
     
  7. rock3r4life

    rock3r4life Rides with no training wheels

    Joined:
    May 23, 2015
    Messages:
    82
    Likes Received:
    7
    I get that, but you are also asking the front of the chain to wrap VERY quickly around and even smaller radius, presumably requiring more energy. I guess my question is how to weigh the pros and cons of parasitic loss, and rotational mass.

    Heres an interesting article showing a notable parasitic power loss from changing the gearing. 153.9hp from stock. 149.1 from -1/+5. 150.6 on -1/+2

    http://www.superstreetbike.com/how-to/bigger-rear-sprocket-makes-more-horsepower-mythbusters
     
  8. JTRC51

    JTRC51 The fast Juan

    Joined:
    May 9, 2008
    Messages:
    1,050
    Likes Received:
    111
    I would have to think that going down 1 in front would be a minimal radius change. Going down 2 in the front....no way!

    I usually do -1/-1 or -1/+0
     
  9. sammPD4075

    sammPD4075 Knows an apex

    Joined:
    Apr 11, 2013
    Messages:
    1,458
    Likes Received:
    109
    screw it, go -5/+5 and let us know haha
     
    R/T Performance likes this.
  10. rock3r4life

    rock3r4life Rides with no training wheels

    Joined:
    May 23, 2015
    Messages:
    82
    Likes Received:
    7
    I order a 2t front and an 49t rear. Should have better drive out of corners. May have to go 3t front for road America. Will report back
     
  11. rock3r4life

    rock3r4life Rides with no training wheels

    Joined:
    May 23, 2015
    Messages:
    82
    Likes Received:
    7
    For realsies tho, I ended up going with -1/0.

    Maybe one day, when im at a dyno, ill see which set of gears at an identical ratio produces more WHP
     
  12. sammPD4075

    sammPD4075 Knows an apex

    Joined:
    Apr 11, 2013
    Messages:
    1,458
    Likes Received:
    109
    im getting my engine rebuilt this winter and dyno tuned .. ill let yall know the results
     
  13. gkotlin

    gkotlin What's an apex?
    STT Staff

    Joined:
    Jul 26, 2011
    Messages:
    577
    Likes Received:
    91
    Don't go smaller then 15 up front.
     
  14. Roll Hard Racing

    Roll Hard Racing What's an apex?
    STT Staff

    Joined:
    May 29, 2012
    Messages:
    153
    Likes Received:
    47

    You will replace the swingarm also. As stated above, the chain has to follow the chain guide. Once it leaves the chain guide, the front sprocket sets a tad lower than the radius of the swingarm pivot. Once the chain leaves the guide, it has to get very small very quick to get down to the front sprocket. It will eat the swingarm on the top. Just heed that advice.
     
    steve p likes this.
  15. rock3r4life

    rock3r4life Rides with no training wheels

    Joined:
    May 23, 2015
    Messages:
    82
    Likes Received:
    7
    I don't think its physically possible to run a 2t front sprocket o_O like I said in the message after, I went -1/0

    Never had the intentions of dropping more in the front. In fact I didn't want to drop any. Except rotational mass, bigger radius... yada yada
     
  16. steve p

    steve p What's an apex?
    STT Staff

    Joined:
    Sep 28, 2007
    Messages:
    744
    Likes Received:
    106
    Possible and doable. Done it on occasion to keep wheelbase where I wanted it when gearing for a track. I usually stick to -1 or stock though for the countershaft sprocket.
     
  17. tom@stewbar.com

    tom@stewbar.com Rockstar

    Joined:
    Sep 21, 2015
    Messages:
    29
    Likes Received:
    5
    -1/+3 on Honda 600RR...perfect for Barber. Had to replace chain, obviously, to keep the wheel base in range. About 600 RPM below red line in 6th gear at end of front straight. Great drives coming off the corners. I guess it does make you a bit busy on the gear shift lever since you are usually in the close ratio top gears but I like it. You have to ride it like a dirt bike and keep the rev's up - which means be in the right gear... Been able to out run/out drive several litre bikes on acceleration coming off the corners...for a couple of gears anyway! Makes 'em work some at getting back around me at least! I can see them cussing behind their dark shields.
     

Share This Page