2006 cbr1000rr blue/yellow

Discussion in 'For Sale: Bikes, Parts & Gear' started by 2006cbr, Aug 21, 2011.

  1. 2006cbr

    2006cbr n00b

    Joined:
    Sep 7, 2009
    Messages:
    29
    Likes Received:
    0
    Well i said i would never sell my baby. But going thru a divorce and could use the extra cash right now to take care of some other things. Lot of peaple on gsb and other sites can comfirm anything ive posted about the bike.

    Bought the bike when it had a little under 13k miles on it about 3 years ago. Currently it has a little over 33k miles in the odomter but everything on the bike has less miles than that..

    After a recent trip to mamo for a little over the winter refreshing for the track this year, it was found that it had a hurt engine(while we were doing the valve job). I didnt waste anytime and huey found me a nice used 07rr motor with less than 700miles on it. While on the dyno to check things out we found it had a bad fuel pump which was the root of my motor going south.

    I have put less than 600 miles on the bike since all this was done.
    New engine,fuel pump and 07 ecu(well used with 700miles on it).
    New dunlop q2's put on a week after the engine was done.
    New woodcraft case savers (both sides).
    New vortex rear sets(silver).
    New plugs,filters cleaned,oil changed, chain cleaned and lubed
    Front forks rebuilt(new seals and fluid).
    Sag set and the bike has been dynoed tuned(again)..


    Now the rest of the goodies on the bike.
    Had a new gas tank installed under the recall on the tank(fuel leak issue) last year done at honda.
    Bike covered in clear lamination for paint protection
    tank has a set of removable tank grips
    Front forks have 25mm ohlins internals in them.
    Rear shock is a ohlins ho604
    Hid lights in both sides (all wiring hidden but nose can still be taken off like stock).
    Watsen Led(second gen) front alum turn signals way brighter than stock and flash oem style
    Asv levers (black) both sides
    Speed bleeders in all of the brake lines
    Braided lines front and rear.
    vesrah Rjl17 front brake pads with about 50% life left in them.
    stock rear pads but have new pads for the rear
    HRC quick throttle kit
    Filter,drain plug and rear swing arm have been safety wired.
    brc street filters with flapper mod
    Ceramic coated stock header(inside and out) black.
    Akropovic titanium slip on
    street legal rap around tag bracket(with led ).
    Motovation frame sliders(cut style)
    Sprocket -1 +2 both steel sprockets with chain(done 10k ago) along with a speedohealer(gps tuned).
    I have another set of sprockets and chain (all new) that will go with the bike also.
    Matching rear cowl cover and rear seat
    Blue taillight(legal red when on)
    (extra front brake calipers and master cylinder)
    Laptimer with bracket to mount it to the fork.
    Have a new rectifier in the bag and just got a notice from honda its has extended the warranty on it also.
    Also have a used 07 rear swing arm complete( loved the black look and was going to install it when i redid the chain.

    Bike has never been down since ive owned it. I have tracked the bike ,but have always been very picky on its maintenance and care.. The nose has a few scratches near the mirrors where the previous owner has pig spotters on it. But i have a mint nose to go along with it.
    I also have 2 stock windscreens ,1 touring windscreen tinted, and 1 carbon fiber db windscreen for it.
    I have all the stock parts that have been taken off ,except for the exhaust.
    Also included are front and rear pitbull stands , 5x8 trailer with drive on wheel chock. Trailer has roughly 1500 miles on it(bought it to just carry my bike to the track).

    I sure i have many extra things i cant remember right now. Just really hate to sell her. But need to get past this point in my life and move on with my son.


    If someone picks this up and decides to use it at the track , ill even throw in a brand new generator(never even had oil in it),10x10 popup and a set of tire warmers in the deal.
    Makes a great track bike but is just as well on the street.

    Asking 7,500 obo for the whole package
    .Bike is located on the south side of atl but i work in sandy springs and would be glad to bring it to work for someone to look at.


    [​IMG]

    Couple of pics pre new rearsets and case savers.
    [​IMG]
    header before install
    [​IMG]
    [​IMG]
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     

Share This Page